Tag: CIEMAT
-
HiLumi LHC: new magnets reach full power | home.cern
The new generation of quadrupole magnets at the IT String test facility has reached its nominal current, validating key technologies for the High-Luminosity LHC
-
HiLumi LHC magnet cryo-assemblies over the halfway mark for qualification
Over half of the new horizontal cryomagnet assemblies required for installation in the High-Luminosity LHC (HiLumi LHC) have been qualified for tunnel deployment, giving confidence in the project’s progress as we speed towards Long Shutdown 3, when major installation works for the upgraded collider will take place.
-
Completion of the production of the Nb3Sn cables for MQXFB magnets
The production of all sixty series Nb3Sn superconducting Rutherford cable lengths marks an important milestone for the manufacturing of the Insertion Region MQXFB magnets of the HL-LHC. Each cable unit length is 750 m long whilst ensuring very tight dimension tolerances.
-
Successful testing of two MCBXF magnets and assembly completed of a third
We have just celebrated the completion of the assembly of the third magnet at CERN facilities. Two have already been successfully tested, confirming their perfect operation within the required parameter window for installation in the HL-LHC cold masses. This follows years of dedication, and overcoming challenges in the production timeline in recent years. Juan Carlos…
-
Test of the long nested dipole corrector
Test of the long nested dipole corrector By Ezio Todesco, WP3 Leader (CERN) The 2.5-m-long nested corrector prototype, named MCBXFAP1, has been successfully tested in the past weeks in SM18. The magnet reached the operational range at 7.5 TeV (ultimate current) with one quench and showed no retraining after thermal cycle, see plots below. The
-
12th Collaboration meeting of the HL-LHC project, finally live again!
12th Collaboration meeting of the HL-LHC project, finally live again! By Oliver Brüning and Markus Zerlauth (CERN) Following the completion of the second Long Shutdown (LS2) and the successful re-start of CERNs accelerator complex for its 3rd operational run, efforts at CERN and across the High-Luminosity collaboration are now focusing on the series production of all
-
MCBXF nested correctors
MCBXF nested correctors By E. Todesco and J. C. Pérez (TE Dept, MSC group, HL-LHC WP3) and F. Toral (CIEMAT) on behalf of the CIEMAT collaboration In June a new assembly of the second nested corrector prototype MCBXFBP2c has been tested in SM18 at CERN. The first version of this magnet manufactured in 2020 had a performance
-
MCBXFB magnets ready for series production after successful design iteration
MCBXFB magnets ready for series production after successful design iteration By J. C. Perez and E. Todesco, TE Dept, MSC group, HL-LHC (CERN) In the HL-LHC machine, to be installed during the third long shutdown (LS3), the family of magnets named MCBXF (see figure above) will be located on both sides of the ATLAS and
-
A first for the PRISMAC project and HL-LHC
A first for the PRISMAC project and HL-LHC Spain has successfully developed the first combined superconducting dipole magnet prototype for HL-LHC. This prototype is part of the Spanish PRISMAC project, led by CIEMAT and with the participation of the CDTI. Read more news
-
7th HL-LHC Collaboration Meeting, CIEMAT, Madrid, 13-16 November 2017
7th HL-LHC Collaboration Meeting, CIEMAT, Madrid, 13-16 November 2017 The HL-LHC project is progressing in the construction phase. The hardware models as well as the prototypes of equipment in their final configuration are under construction or under test. In 2017, we achieved a number of key milestones. The crab cavity prototypes for the SPS tests